Converted to a Tank Locomotive 39782: The prototype is a symbol for the German Federal Railroad's thoughts about reawakening and its willingness to experiment at a time when it was still new. Theoretically well thought out but not feasible practically, the two class 78.10 locomotives remained the only ones of their type.
Standard Design Branch Line Cars 43353: After World War I, the newly founded German State Railroad acquired a large quantity of passenger car types, which as a rule had wooden bodies. Standard design cars with metal bodies were developed to simplify maintenance. These cars also greatly increased safety. The German State Railroad focused on predecessor designs for branch line types and purchased the customary two-axle corridor cars with open platforms. At the start of the Thirties, there was another modernization push with the introduction of closed platforms and welded car bodies. These units remained in service on the DB well into the Sixties, often also as intermediate cars for powered rail cars. A few cars have been preserved – among other things on the Bavarian Local Railroad Association and on the IG 3 Lakes Railroad in the Black Forest.
Prototype 39782: German Federal Railroad (DB) steam locomotive, road number 78 1002, 4-6-4T design with a type 2T17 two-axle short tender. Version with triple headlights as it looked around 1958.
Prototype 43353: Five German Federal Railroad (DB) passenger cars. One type PwPostie baggage/mail car, one type Abie corridor car, 1st/2nd class, and three type Bie corridor cars, 2nd class. Bottle green paint scheme. The cars look as they did around 1958.
Highlights 38782:
- Especially intricate metal construction.
- Many separately applied details.
- Triple headlights.
- Cab lighting controlled digitally.
- Firebox flickering controlled digitally.
- Current-conducting coupler on the tender controlled digitally.
- Factory-installed smoke unit, controlled digitally.
- mfx+ digital decoder and extensive operating and sound functions included.
- Buffer height adheres to the NEM.
Highlights 43353:
- Car floors and parts of the car bodies are new tooling.
- LED interior lighting for the first time.
- Interior lighting includes buffer memory.
- One 2nd class car includes built-in marker lights.
- Current-conducting couplers.
- The interior lighting can be controlled digitally from the 39782 steam locomotive.
Model 39782: The locomotive has an mfx+ digital decoder and extensive sound functions. It also has controlled high-efficiency propulsion with a flywheel, in the boiler. 3 axles powered. Traction tires. The locomotive and tender are constructed mostly of metal. The locomotive has a built-in smoke unit that will work in conventional operation and that can be controlled digitally. The triple headlights change over with the direction of travel, will work in conventional operation, and can be controlled digitally. Firebox flickering can be controlled digitally. The cab lighting can also be controlled digitally. Maintenance-free warm LEDs are used for the lighting. The current-conducting coupler on the tender can be controlled digitally. The minimum radius for operation is 360 mm / 14-3/16". Piston rod protection sleeves, brake hoses, and reproduction prototype couplers are included. The locomotive also comes from the factory with figures of a locomotive engineer and a fireman. Length over the buffers approximately 19.9 cm / 7-7/8".
Model 43353: All of the cars have factory-installed LED interior lighting and current-conducting couplers. The car consist can be supplied with current from the steam locomotive, road number 78 1002 (item number 39782) using the built-in current-conducting couplers. The interior lighting can be controlled digitally from the locomotive. One 2nd class car has built-in marker lights. Total length over the buffers approximately 75 cm / 29-1/2".
Prototype information 39782: Steam Locomotive, Road Number 78 1002 At the start of the Fifties, acceleration of suburban and urban mass transit enjoyed a high priority on the new German Federal Railroad, yet the roster of tank locomotives usable for this purpose was clearly limited. On the contrary, locomotives with tenders were in abundant supply and it seemed obvious to investigate the large roster of class 38.10-40 (Prussian P 8) locomotives for this kind of use. Therefore, the DB took on the experiment of converting this unit into a tank locomotive in order to save the required turning of the locomotive at the destination station. The firm Krauss-Maffei was contracted in 1951 due to suggestions from Prof. Mölbert, Hannover, and in cooperation with the railroad's central office in Munich to equip road numbers 38 2890 and 2919 with short tenders. The boiler, running gear, and frame remained almost unchanged. Only the pilot truck was changed by the installation of a new pivot housing to provide even more side play. In addition, an automatic reset device was applied. The cab was now enclosed on all sides, and it was completely rebuilt of welded construction. A hefty drawbar connected the newly developed two-axle short tender to the locomotive. This drawbar had a reset device based on a Krauss-Helmholtz frame. Coal could be taken through a circular cutout in the cab's back wall, which was sealed to the tender by a rubber diaphragm. After being rebuilt, the two units were classified as tank locomotives with a 4-6-4T wheel arrangement and were therefore given the road numbers 78 1001 (former 38 2919) and 1002 (former 38 2890). They were certified for a permissible maximum speed of 100 km/h / 63 mph in both directions, yet when run in reverse over 60 km/h / 38 mph they were said to be problematic. More units were not rebuilt because this investment was no longer worth it due to the ongoing structural change on the railroad. Initially, the two units ran starting in 1953 in the area of the Munich District. Later they were used in the Lake Constance area. Both locomotives were put into storage as early as 1959 and retired in 1961.
One-time MHI series!