Trix 66837 2,000 MILLIAMP LOCOMOTIVE DECODER FOR NEM CONNECTOR

[Trix: 66837]

COMPLETELY SOLD OUT AT TRIX ... BUT AVAILABLE THROUGH US WHILE STOCK LASTS!

Receiver for all DC locomotives with a current, draw up to 2,000 milliamps (motor 2,000 milliamps, lights 300 milliamps). Suitable for digital locomotives with an NEM 8-pin digital connector.

• Can be used universally in Selectrix and DCC formats.
• Automatic system and analog recognition.
• Same locomotive address in Selectrix and DCC operation.
• 7 adjustable maximum speeds.
• 4 adjustable motor impulse variations.
• Automatic load compensation.
• Connections for a light function.
• Connections for an auxiliary function.
• 4-pin SUSI connector for additional special functions in DCC operation.
• Short circuit protection for the motor outputs.
• Overload protection for the light outputs.
• Overload protection for the auxiliary function outputs.
• Programming of additional settings by means of selection of the address "00", example: finer gradation of steps for pulse widths (monitoring variation), direction reversing.

In Selectrix Operation:
• 31 speed levels.
• 111 addresses.
• Block operation with simple diodes (1 or 2 stopping areas).
• Braking operation with a braking diode.

In DCC Operation:
• Manual speed level selection 14/28 levels.
• Automatic switching to 128 speed levels.
• Addresses can be either 7 or 14 bits.
• Braking operation with direct current and "broadcast-mode" brake generators

Dimensions approximately 24.2 x 15.4 x 3.9 mm / 15/16" x 5/8" x 1/8".

Share Product
Share via E-Mail Share on Facebook Share on Twitter